Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13701807
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Shoes mixer, mixer brand which is good, shoe manufacturers mixer |
Published: | 2015-07-03 |
Validity: | 0 |
Specifications: | Any |
Quantity: | |
Price Description: | |
Detailed Product Description: | 3L small mixer mixer mixing plastic material quality is good or bad, in addition to feeding order, mainly depending on the mixing temperature, loading capacity, rotor speed, mixing time, pressure and tied on top of the rotor type. Drive motor: 2.2KW Discharge mode: tipping bucket (automatic, manual optional) Heating: Electric heating (automatic thermostat) Cooling: water cooling water (mixing): 0.2-0.4MPA Weight: 100KG3L small mixing Machine Dimensions: 80X60X120CM Power: 380VAC3L mixer, small mixer detection 3L, 3L small laboratory mixer mixer open several factors Dongguan Hoi Fu Automation Equipment Co., analyze the impact of open secret Several factors mill: 1. roller speed, speed ratio: usually roll speed of 16-18R / MIN, fast and slow roll after roll former, shear force ratio, ratio greatly reduced shear force, on the contrary, relatively small shear ratio will be smaller. 2. roll away: during mixing roll away is appropriate importantly, roller pitch is too large, rubber mixing equipment unevenly Shoes mixer, roll away from small, relatively homogeneous mixing some, but produce power It will be low. 3. roll temperature: the temperature of the formulation was based on the needs of the set, when the set temperature beyond mixer shoe factory, the machine may take the initiative of water, in order to ensure that the temperature is appropriate. The roll mill time: according to the material properties of the formulation to be, too refined form of the physical properties of kneaded lost shoe mixer, and simple scorch, quality is not good; the mixing time is too short, the material will not mix even a direct impact on shaping the rear section. 5. Feeding sequence: it is usually difficult to add a small amount of slack, lax easily after adding more than the amount, but also according to the actual recipe may be. 6. Replace the plastic Capacity: loading too much glue, plastic materials can not be entering the nip shoe mixer price, can only vibrate in place, will form a non-uniform mixing of materials; equipment glue is too small, not a series of glue supply, produce power low. Shoes mixer, mixer brand which is good, mixer shoe factory in Dongguan City, Hoi Fu by automation equipment. Shoes mixer, mixer brand which is good, mixer shoe factory in Dongguan City, Hoi Fu automation equipment Limited (www.haifucn.com) (www.haifucn.com) this year introduced a new upgrade, more pictures for reference only, please call Tel picture on this page or to obtain the latest information, contact: Mr. Xu. |
Admin>>>
You are the 24115 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan City, Hoi Fu Automation Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 24115 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan City, Hoi Fu Automation Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility